1-800-843-1794
CGN-2009 PES

BOTTLE TOP VACUUM FILTER SYSTEM WITH MOLDED GRADUATIONS, PES MEMBRANE, STERILE, NEST

Nest Cell and Tissue Culture Plastics

• High flow rates and throughput
• Low protein binding low chemical extractable
• Non-pyrogenic and surfactant-free
• PES membrane
• Molded clear graduation on both filter tops and receiving bottles
• 45mm bottle tops fit most 45mm neck plastic and glass media storage bottles
• Easy grip style receiving bottles can also be used as storage bottles
• Maximum bottle volume is greater than filter tops, eliminating overflow

Disposable filter systems are useful for large volume sample separation and sterilization for tissue culture media and other biological buffers. Membrane filters with graduated filter tops made with polystyrene, and polyethylene necks with polystyrene receiving bottles. A separate sterile polyethylene cap is included.

Smaller Case Quantities Available Here ►

Item NumberItem DescriptionPQPriceQty AvailQuantity
CGN-2009-001
Filter System, 250mL, 0.10µm, Vacuum, Bottle Top, PES
CS12
Call for
Availability
CGN-2009-005
Filter System, 250mL, 0.22µm, Vacuum, Bottle Top, PES
C12
6
CGN-2009-002
Filter System, 250mL, 0.45µm, Vacuum, Bottle Top, PES
CS12
Call for
Availability
CGN-2009-006
Filter System, 500mL, 0.10µm, Vacuum, Bottle Top, PES
CS12
Call for
Availability
CGN-2009-007
Filter System, 500mL, 0.22µm, Vacuum, Bottle Top, PES
C12
18
CGN-2009-008
Filter System, 500mL, 0.45µm, Vacuum, Bottle Top, PES
CS12
Call for
Availability
CGN-2009-014
Filter System, 1000mL, 0.10µm, Vacuum, Bottle Top, PES
CS12
Call for
Availability
CGN-2009-015
Filter System, 1000mL, 0.22µm, Vacuum, Bottle Top, PES
C12
42
CGN-2009-016
Filter System, 1000mL, 0.45µm, Vacuum, Bottle Top, PES
CS12
Call for
Availability
  ♣ Nest product line

Membrane Type

Hydrophilicity

Features

Application Directions

Cautions

PES

Hydrophilic

Low protein adsorption, high flow rate, wide pH Range, high chemical compatibility, good heat resistance

For general culture media and aqueous solutions, polar or middle-polar solvents, neutral aqueous solutions

Should not be used for chloroform esters, amides and strong acids or strong bases.

PVDF

Hydrophilic

Wide practicability, good oxidation resistance and heat resistance

May be used for aqueous solutions and most solvents, including strong non-polar solvents. Ideal for preparations of HPLC and GC

Should not be used for strong acids and bases

MCE

Hydrophilic

Strong chemical compatibility and low protein adsorption, the optimum pH range is 3-6

Used for particle analysis of general culture media and aqueous solutions. HPLC sample preparation.

The set should not be used for filtrations of ethanol and alkaline solutions. The working temperature should not be over 40°C.

CA

Hydrophilic

High flow rate and heat stability as well as very low adsorption, stable within the range of pH 4-8

It may resist most alcohols and oils, and is suitable for sterling filtration of aqueous solutions, buffers, serum and culture media, as well as filtration of the moving phase of HPLCD.

The CA Membrane may accommodate a smaller volume of buffer since it has low hydrophilia.