1-800-843-1794
CG-2045

STIRRER COUPLINGS, FLEX-DRIVE

The design of our Flex-Drive stirrer coupling eliminates the need to use rubber hose or universal adapters to attach your glass stirrer shafts to overhead motors. Coupling incorporates a 3in long epoxy coated spring to compensate for misalignment and to help isolate breakage. Lower end of coupling has a Celcon compression nut which secures the glass shaft to the coupling via a silicone rubber insert. The silicone insert, along with the knurled compression nut, permits hand tightening of both ground and polished shafts. Top epoxy coated bushing is fitted with an allen screw and will accept 5/16in O.D. stirrer motor shafts. Adapters to 1/4”, 3/8" and 1/2” are also supplied to permit use of coupling with stirrer motors having different drive shaft diameters.

Item NumberItem DescriptionPQPriceQty AvailQuantity
CG-2045-01
Flex-Drive Coupling for 10mm OD Glass Stirrer Shaft
EACH
9
  ✱ Machined Product Line
Item NumberItem DescriptionPQPriceQty AvailQuantity
CG-2047-02Motor Adapter, 5/16" Male to 1/4" FemaleEACH
22
CG-2047-03Motor Adapter, 5/16" Male to 3/8" FemaleEACH
14
CG-2047-04Motor Adapter, 5/16" Male to 1/2" FemaleEACH
Call for
Availability
CG-2047-05Motor Adapter, 5/16" Male to 5/16" MaleEACH
173
CG-2045-06Replacement Silicone Rubber InsertEACH
11
  ✱ Machined Product Line