PT100 RTD TEMPERATURE SENSORS, SHIELDED CABLE, PFA COATED, PT-100

PT100 RTD temperature sensor is for direct insertion into flasks and process reactors using any O-Ring style compression adapter, such as the CG-1042-E. Probes are constructed using shielded cable to ensure a clean signal.

Available in Three Styles:

Style “A” has a male lemo connector and can be used with CG-3499-10 white coiled extension cords which have a female lemo connection on one end and a male mini plug on the other. Probe is constructed using shielded wire/cable. These will fit the J-Kem temperature controllers (CG-3200 through CG-3210). Probes are designed to be used with round bottom flasks.

Style “B” has a Lemo Connector direct wired to a 12 foot lead and is for use with all Huber circulators permitting process temperature control based on the contents of the reactor. Sensor is constructed using GREEN shielded wire/cable. Lemo connector can be used as a ground for the probe using an optional grounding clip and wire.

An adapter having a female Lemo connector to the 2-blade mini plug is available to allow use of the “Style B” sensors with equipment having this connection.

Style “C” has a Lemo Connector direct wired to a 25 foot PVC armored lead and is for use with all Huber circulators permitting process temperature control based on the contents of the reactor. Sensor is constructed using GREEN shielded wire/cable. Lemo connector can be used as a ground for the probe using an optional grounding clip and wire.